Pöttinger TORRO, HIGHER SPEED, SHORT CUT LOADER WAGON 

High capacity, short cut loader wagon with spiral feed rotor system, highest loading capacity and handling comfort (recommended tractor capacity from 136 hp on)

Pöttinger TORRO LOADER WAGON 4500 / 5100 / 5700
Standard Equipment includes: Pick-up 1.85m wide with 6 rows of tines, hydraulically controlled, pick-up wheels with 600/55-22.5 12 ply Alliance tyres, POWERMATIC feeding/cutting system consisting of a rotor with 8 rows of teeth arranged in a spiral format, driven via oil-bath-gearbox, quick removal of loading system for use as a forage wagon or for maintenance purposes. Bank of 39 knives each with knife protection and 35mm spacing, knife-bank swings 90 degrees to the side for comfortable knife changing and optimum accessibility for cleaning. Hydraulically adjustable drawbar with double-acting cylinder, steel silage sides, hydraulic floor drive with 4 scraper floor chains. Steel silage sides galvanized and coated, entry door with integrated steps, lighting in front side for loading space, automatic control of loading mechanism. Electrohydraulic 'POWER CONTROL' with integrated Isobus software. PTo speed 1000 rpm, mud guard, PTO drive shaft with cut-out clutch. (2100NM). Fully sprung suspension with hydraulic brakes on all 4 wheels. Low hitch drawbar with 50mm rotating eye. The D model incorporates infinitely adjustable speed control; cross conveyor and rear beaters.

5543..00.635.0 TORRO 4500 L 45cu.m
5544.00.635.0 TORRO 5100 L 51cu.m.
5545.00.635.0 TORRO 5700 D 57cu.m.
5543.00.645.0 TORRO 4500 D 45cu.m.
5544.00.645.0 TORRO 5100 D 51cu.m.
5545.00.645.0 TORRO 5700 D 57cu.m.
All above with hydraulic brakes, low hitch drawbar and rotating towing eye 50mm.

Accessories:
102.50.070.0 Scharmuller-type--trailer-ball coupling D80mm (only available for low hitch drawbar)
100.20.300.0 tyres 500/60-22.5 155D CARGO XBIB Michelin in lieu of tyres 500/60-22.5 12 ply Alliance for 20 tons total weight with 65km/h
100.20.310.0 tyres 600/50-22.5 159D CARBO XBIB Michelin in lieu of standard tyres for 20 tons total weight with 65 km/h
100.20.280.0 Tyres 650/50R22.5 157D FLOTATION PRO Vredestein for 20 tons total weight with 65km/h
Attention:
Total width 2.7m
100.20.290.0 Tyres 700/45-22.5 12 ply FLOTATION=Vredestein for 20 tons total weight with 50 km/h. Attention total width 2.8m
100.20.380.0 Tyres 710/45R-22.5, 165D CARGO XBIB Michelin for 20 tons total wieght with 65 km/h
100.01.150.0 Steering axle for hydraulic brake
100.80.010.0 Load sensing kit (consists of control pipe size 2 and hydraulic couplings size 4) for all tractors
102.10.010.0 Rear switch for scraper floor
101.15.050.0 Third beater for Torro D
101.25.050.0 Cross Conveyor
102.05.010.0 Oil pressure switch for L-operation (necessary with dismounted beaters)
101.30.050.0 2 speeds hydraulic motor for scraper floor in lieu of standard
102.10.020.0 Additional cable for control box to control from rear
102.65.010.0 Additional rear board (recommended for crops with low specific density)
455.365/883 PTO shaft 1 3/8" 21-splines add-on price
455.365/884 PTO 1 3/4" 20-splines add-on price
100.70.230.0 Set of spare knives 39 units (434 126) when ordered with wagon
Isobus terminal/load torque metering
100.01.200.0 Axles with paraboli suspension, ABS tyres 600/50R-22.5, 159D Michelin CARBO XBIB
100.01.210 Steering axle with parabolic suspension, ABS tyres 600/50R-22.5, 159D Michelin CARGO XBIB
26.5" wheels (only with 26.5" chassis)
100.20.390.0 Tyres 600/55R-26.5 165D Michelin CARGO XBIB for 22 tons maximum wieght
100.20.400.0 Tyres 710/50R-26.5 170D Michelin CARGO XBIB for 22 tons maximum weight
100.20.420.0 tyres 800/40R-26.5 169D Vredestein FOTATION Pro for 22 tons maximum weight

BACK