Pöttinger EUROTOP FOUR ROTOR RAKES
Pöttinger EUROTOP RAKES
Take a look at a Pöttinger TOP rake and you'll soon realise that the centre hub - housing the cam-track - is a bigger diameter than most. That's because in heavy crop conditions, the rake arm bearings are placed under less stress when positioned further apart - a massive 60cms apart on Pöttinger 's Eurotop 421N for example. The cam track itself (the heart of all rakes) is 42cms. in diameter. Not only does it provide better bearing support, it provides more graduations in its curves to give smoother tine action.

	TOPTECH CAM TRACK The large diameter ductile graphite iron TOPTECH cam track has been computer developed to optimise raking performance whilst minimising wear. Hardened steel cam rolers with ball bearings run inside a completely sealed housing. The bearings in the tine arms are separated by 600mm and located tangentially to give the maximum possible distance between the bearings and the rotor shaft. This arrangement minimises stress, extends service lift and provides the best possible raking performance.
Top tech cam track
Multitast rotor suspension	"MULTITAST" ROTOR SUSPENSION SYSTEM (Option) The "Multitast" system effectively guides the rake arms over undulating ground to minimise soil contamination and assist in producing high quality forage. This is achieved by two separate controls: 1. Each rotor features a knuckle type joint to the carrying frame which enables the rotor to deflect by a controlled amount (the joint can easily be locked to work conventionally). 2. A jockey wheel mounted ahead of each rotor senses the humps and hollows and guides the rotor to the optimum working angle to minimise scalping. It is a simple, but very effective solution to an age old problem in quality silage making - avoiding soil contamination. With MULTITAST ground hugging suspension system

EUROTOP RAKES - Four Rotor 1251
Standard Equipment Includes:
Working Width: 9.90m - 12.50m, hydraulically adjustable
Tractor Connection: U-frame for CAT II connection to tractor lower link arms
Transmission: Single PTO drive shaft, 540rpm
Rotors: 4 rotors, each with 12 removable tine arms, tine arms fitted with two bearings, tangentially arranged, 4 twin tines per arm, hermetically sealed cam track, steel rollers on ball bearings, sealed bearings, rotors can be height adjusted from outside rotor, pantograph rotor suspension, rotors can be raised hydraulically for transport, hydraulic distributor for lifting both rotors at once (each rotor is protected individually), swath curtain between the two rear rotors is made of high strength material
Swath Width: Pre-selected mechanically between 1.20m and 2.00m
Transport Chassis: Located between the two pairs of rotors, pivots hydraulically, 2 x 15.0/55-17 tyres
Brakes: Twin line air brakes, up to 50 kmh
Rotor Chassis: Trailing, lockable wheels, 16 x 6.50-8 6 ply and MULTITAST ground hugging suspension system
Dimensions: 3.00m transport width, 8.00m parking length, 3.90m transport height (with tine carrier arms removed)
Weight: 3840 Kg
Operation: Electronic/hydraulic in-cab controls. Automated sequences for: transport/work setting, headland turn presets with programmable time delay for lifting and lowering the front/rear pairs of rotors
Hydraulics: 1 x double acting or 1 x single working with gravity return line (permanent fluid circuit)
Accessories: Safety guards, warning lights and road lights
244.00.632.0 EUROTOP 1251 MULTITAST

Optional Equipment:
244.32.001.0 Kit of inner jockey wheel in lieu of Multitast (4 wheels)
244.32.910.0 Kit of inner jockey wheel additional to Multitast (6 wheels)

BACK